VSync 924 Spécifications télécharger pdf (Page 105)

Board summary 105

• One to four independent acquisition paths, depending on the board. Each

acquisition path has the following:

- Input from one of two software selectable sources. The sources are AC coupled.

- Two low-pass filters with cut-offs at 33 MHz and a 7.5 MHz, respectively.

- Variable gain amplifier and adjustable offset to set the black and white reference

levels.

- 10-bit A/D with a 65 MHz sampling rate.

- An LVDS/TTL pixel clock input/output.

- An LVDS/TTL CSYNC input or HSYNC input/output.

- An LVDS/TTL VSYNC input/output.

- A TTL auxiliary input signal (trigger input, field polarity input, or user input).

See the Matrox Solios hardware reference chapter for supported configurations.

- A TTL auxiliary output signal (timer output or user output). See the Matrox

Solios hardware reference chapter for supported configurations.

- Two TTL/LVDS auxiliary output signals (timer output, synchronization

output, or user output). See the Matrox Solios hardware reference chapter for

supported configurations.

- An opto-isolated auxiliary input signal (trigger input or user input). See the

Matrox Solios hardware reference chapter for supported configurations.

- RS-232 serial port.

-Bi-color status LED.

• One, two, or four 1024 entry 8- or 16-bit programmable LUTs, depending on

the board.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 159 160

Pas de commentaire

VSync 924 Spécifications Page 105