VSync 924 Spécifications télécharger pdf (Page 122)

122 Appendix B: Technical information

12+,25- X0 Video input data X0.

13 Inner shield Ground.

14 Inner shield Ground.

15+,2- CC4 M_CC_IO4 Camera control output 4 for acquisition path 0, which supports: timer output

(M_TIMER1/M_TIMER2 on M_DEV0), user output

(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output,

or rerouting of specific auxiliary input signals

†

17+,4- CC2 M_CC_IO2 Camera control output 2 for acquisition path 0, which supports: timer output

(M_TIMER1/M_TIMER2 on M_DEV0), user output

(M_USER_BIT_CC_IO0/M_USER_BIT_CC_IO1 on M_DEV0), VSYNC, HSYNC, clock output,

or rerouting of specific auxiliary input signals

†

20+,7- SerTC Serial port to video source (UART).

26 Inner shield Ground, or for PoCL cables, +12 V.

*. These MIL constants represent the signals as of MIL 10. The signals that were previously represented by M_CCn became represented by

M_CC_IOn (where the value of n remained the same between the constants). For a complete list of changes between previous MIL versions and

MIL 10, see MILSoliosCameraLinkIOConversionTable within MIL Release Notes.

†. See the table in the Camera control and auxiliary signals section of Chapter 4: Matrox Radient eCL hardware reference for more information on

which auxiliary input signals (or auxiliary I/O signals set to input) can be rerouted onto the camera control output signals.

Pin Hardware

signal name

MIL constant

for auxiliary

signal

Description

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 159 160

Pas de commentaire

VSync 924 Spécifications Page 122